The POPE Professional® TT-212
The POPE Professional® AC-212 is a three-way powered Line Array speaker system designed for large venues and live concert. The Line Array speaker consist of POPE Professional® dual 12” Neodymium woofer that is circuited parallel, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5” Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced transducers are providing high power-to-weight ratio.
The POPE Professional® AC-212 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 130dB continuous, 138dB peak, Wide bandwidth 80Hz – 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.
The enclosure constructed with 15 mm birch faced plywood, screwed and glued together for maximum strength and rigidity. The AC-212 systems are designed to be powered by POPE Professional® L-7H Class-D amplification.
Applications
• Touring sound
• Small and medium-scale Live Sound
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• Delay systems for large scale outdoor sound reinforcement
• Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues and etc..
Features
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
• Neodymium Drivers
• 90° x 10° (H x V) Coverage
• 1:9 safety standard rigging hardware
• 2*12″ LF, 4*6.5” & 2*1.4” throat Compression driver
• Class-D amplification
• Supplied with SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Built-in DSP
Specifications
Line Array Element
| Model | AC-212 |
| Class | Three way Powered Line Array Speaker |
| Frequency Response (± 3dB) | 80Hz – 20kHz |
| Horizontal Coverage Angle | 90° |
| Vertical Coverage Angle | 10° |
| Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
| SPL** | 130dB Continuous, 138dB peak |
| Electronics Sections | |
| Amplifier | |
| Model | VT-6 |
| Total Power | 10000W Peak, 5000W RMS Continuous |
| High Frequency | 2500W Peak, 1250W RMS Continuous |
| Mid Frequency | 2500W Peak, 1250W RMS Continuous |
| Low Frequency | 2500W Peak, 1250W RMS Continuous |
| Cooling | Aluminum heat Sink with two Fans |
| Power Connector | In / Out with Rubber sealing cover |
| Power | AC 85-265V @ 50-60Hz |
| Processor | |
| In/Out | 1 In / 4 Out |
| DSP | 40 bit / 96kHz DSP |
| Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
| Analog Signal | Balanced Input / Output |
| Digital Signal | Dante® / AES (DE-44 Dante® Module – Optional) |
| Connectors | XLR male / female and Ethernet |
| Control | LAN |
| Preset | 24 |
| For more specifications about DSP | Check the XT-4040 product catalogue |
| Transducer Sections | |
| High Frequency | 2*1.4″ throat POPE Professional® Compression driver |
| Voice Coil Diameter | 75 mm (3”) |
| Magnet Material | Neodymium |
| Diaphragm Material | Titanium |
| Mid Frequency | 4*6.5″ (165 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 53.24 mm (2”) |
| Magnet Materia | Neodymium |
| Low Frequency | 2*12″ (305 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 102.01 mm (4”) |
| Magnet Material | Neodymium |
| Enclosure | |
| Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
| Finish | SoundFlex® environmental friendly coating |
| Suspension System | Integral hinge bars and quick release pins |
| Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
| Packing | Foam with wooden crate carton packing |
| Dimensions (H x W x D) | 380 mm × 1093.5 mm × 530 mm |
| Net Weight | 66 kg |
| Gross Weight | 77 kg |